[ERROR] Unable to detect a network mask for the IP

Discussion in 'Plesk Automation Suggestions and Feedback' started by mfgo_parusr, Feb 27, 2013.

  1. mfgo_parusr

    mfgo_parusr Kilo Poster

    Messages:
    27
    Hello,

    I can't install PPA on my Virtuozzo-Container but I don't know why.

    The Error:
    [Mi 27 Feb 2013 18:47:07 CET][ERROR] Unable to detect a network mask for the IP: '141.101.33.ABC'



    [root@st2 /]# hostname
    st2.vc2.xxxxxxxx.com

    [root@st2 /]# hostname -i
    141.101.33.ABC

    [root@st2 /]# nano /etc/hosts
    127.0.0.1 localhost.localdomain localhost
    # Auto-generated hostname. Please do not remove this comment.
    141.101.33.ABC st2.vc2.xxxxxxxx.com st2

    [root@st2 /]# ifconfig
    lo Link encap:Lokale Schleife
    inet Adresse:127.0.0.1 Maske:255.0.0.0
    inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    Kollisionen:0 Sendewarteschlangenlänge:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    venet0 Link encap:UNSPEC Hardware Adresse 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
    inet Adresse:127.0.0.1 P-z-P:127.0.0.1 Bcast:0.0.0.0 Maske:255.255.255.255
    UP BROADCAST PUNKTZUPUNKT RUNNING NOARP MTU:1500 Metric:1
    RX packets:280627 errors:0 dropped:0 overruns:0 frame:0
    TX packets:142020 errors:0 dropped:0 overruns:0 carrier:0
    Kollisionen:0 Sendewarteschlangenlänge:0
    RX bytes:416145525 (396.8 MiB) TX bytes:6367338 (6.0 MiB)

    venet0:0 Link encap:UNSPEC Hardware Adresse 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
    inet Adresse:141.101.33.ABC P-z-P:141.101.33.ABC Bcast:141.101.33.255 Maske:255.255.255.0
    UP BROADCAST PUNKTZUPUNKT RUNNING NOARP MTU:1500 Metric:1


    The PVC config is set to IP 141.101.33.ABC and Subnetmask 255.255.255.0 for this container.
     
  2. Andrey Dobrenko

    Andrey Dobrenko Odin Team

    Messages:
    256
    Please set a correct IP address on the container and run PPA installer again. Thanks!
     
  3. mfgo_parusr

    mfgo_parusr Kilo Poster

    Messages:
    27
    Thanks for the joke, it is saved to the correct IP address for this container. It is only replaced by ABC for demonstration purposes.
     
  4. Andrey Dobrenko

    Andrey Dobrenko Odin Team

    Messages:
    256
    Please set system locale as en_US.utf8, just run the command "#export LANG=en_us.utf8" before running PPA installer. Thanks!
     
  5. mfgo_parusr

    mfgo_parusr Kilo Poster

    Messages:
    27
    Okay, I installed this system on a fresh container, uses en_US.utf8 (otherwise, the installation starts not at all) and in the last line after a complete install process:

    [Fr 22 Mär 2013 14:59:19 CET][ERROR] Unable to detect a network mask for the IP: '141.101.33.XXX'

    New beginning, same error...

    The IP address must be different from that of 'the container? Currently, the address is in the installer line identical with the container, on which it is installed.

    ./ppa_installer.sh --password PASSWORDPASSWORD --admin_email webmaster@DOMAIN.TLD --ip 141.101.33.XXX
     
  6. mfgo_parusr

    mfgo_parusr Kilo Poster

    Messages:
    27
    Solved.
    Lang wasn't saved...
     
  7. Andrey Dobrenko

    Andrey Dobrenko Odin Team

    Messages:
    256
    Hi,

    It will be improved in MU#08 and you no longer have to set up system locale manually. Thanks!

    Best Regards,
    Andrey
     

Share This Page